i have the 2024 model but it has an ecu, so i think this method of derestriction isnt possible on my bullit hero 50.does anyone know how i can derestrict my ecu without having to buy an expensive new one?thanks
I have followed Jorg's instruction on derestricting. I was unable to start the moto the starter would not work. After rebuilding the original restriction and connecting the pink wire still no luck. Cant start the moto now.
It often comes into question what is the best wall mount for such big TVs, can you mount a 75-inch tv on the wall, are tv wall mounts universal, what size screws are used to mount a Samsung tv, and even can you hang a curved tv on a regular wall mount? Read till the end to have all such questions answered.
These take away completely from the cluttering mess of a TV stand and save you the trouble of clearing up a table to rest your TV on. All you need is a flat wall and you can hang your set up with ease. This article will be centered around wall mount products meant for TCL sets, be it a 40 inch or a 65 inch TV. For further information, you can check our section about wall mount for 65 inch tcl
Most ignition barrals come with 4 wires but the look for the bike has 2 the exhaust is restrive so change it and that will make it quicker also check the tappets lastly try disconecting the battery for 30 mins then plug it back in other than that check the connector block on the bike they might have water in them
For the first: thanx to ridingreviews for your youtubevids and this blog which made me derestrict my Bullit Hero 50 after 300 km, you rule!
I`ve derestricted mine today and took some pics which I thought could be helpful for all other potential derestricters. It worked fine in the end and saved me from buying an expensive open ecu. 20 minutes work only.
I´ll find out if there`s a way to add a switch in the removed electronic bridle to easily change from 45 to 70 km/h (in Germany it's forbidden to derestrict), after disconnecting the pink wire I connected the bridle under the seat again and it ran 45 km/h.
Get rid of the bridle under the seat, unscrew the seat and the tank (3 screws only), disconnect the male pin (gray wire) corresponding with the pink wire from the clock and isolate it. Rebuild the bike and have fun.
I muss comfess I really love this bike. I owned several 50ies in my life and was supposed not to have one anymore but I couldn*t resist buying this one, the sound and the look and the size makes you feel great riding it. But it's probably the heaviest 50 ever built.
@Riding reviews I thought that the removed electronic bridle from under the seat connects at least 2 of the 4 wires but I measured the electric flow between all the four pins today and there was no flow, seems to be deadended. But this makes no sense due to the influence it has on the restriction. I also couldn't find this part in the circuit diagram which is attached in the instruction manual. Do you have an idea whats inside the dead end of this part (all the 4 cables disappear in a black rubber)? I want to find out if it's possible to add a switch in order to switch the restriction on or off when this part remains connected. Sorry for my english, hope you understood.
I dont have one in stock at the minute but as soon as i do i will get a picture some other people have done this on there bike maybe they have pics of this
i have the 2024 model but it has an ecu, so i think this method of derestriction isnt possible on my bullit hero 50. does anyone know how i can derestrict my ecu without having to buy an expensive new one? thanks
Hi Admin.
I have followed Jorg's instruction on derestricting. I was unable to start the moto the starter would not work. After rebuilding the original restriction and connecting the pink wire still no luck. Cant start the moto now.
I would appreciate your advice.
Greg
I have a question will the bike restrict again if you put the thing under the saddle back or what exactly is the use of the thingy?
I have a question will the bike restrict again if you put the thing under the saddle back or what exactly is the use of the thingy?
Hey i have a bull it hero 50 and I know it sounds stupid but I can’t find out how to remove the tank in order to derestrict it, can anyone help?
It often comes into question what is the best wall mount for such big TVs, can you mount a 75-inch tv on the wall, are tv wall mounts universal, what size screws are used to mount a Samsung tv, and even can you hang a curved tv on a regular wall mount? Read till the end to have all such questions answered.
There is also a guide in the end after wall mount for 82 inch samsung tv for wallmountedhub
Hi my bullit hero 50 engine light on
bike running prefect?
how do I get it of
thanks
These take away completely from the cluttering mess of a TV stand and save you the trouble of clearing up a table to rest your TV on. All you need is a flat wall and you can hang your set up with ease. This article will be centered around wall mount products meant for TCL sets, be it a 40 inch or a 65 inch TV. For further information, you can check our section about wall mount for 65 inch tcl
bullit hero 50 will not fire
spark at plug carb clean
can timing slip
hi have a bullit 50 o suddenly will not start any clues
Check the tappets that would cause this issue
Most ignition barrals come with 4 wires but the look for the bike has 2 the exhaust is restrive so change it and that will make it quicker also check the tappets lastly try disconecting the battery for 30 mins then plug it back in other than that check the connector block on the bike they might have water in them
For the first: thanx to ridingreviews for your youtubevids and this blog which made me derestrict my Bullit Hero 50 after 300 km, you rule!
I`ve derestricted mine today and took some pics which I thought could be helpful for all other potential derestricters. It worked fine in the end and saved me from buying an expensive open ecu. 20 minutes work only.
I´ll find out if there`s a way to add a switch in the removed electronic bridle to easily change from 45 to 70 km/h (in Germany it's forbidden to derestrict), after disconnecting the pink wire I connected the bridle under the seat again and it ran 45 km/h.
Get rid of the bridle under the seat, unscrew the seat and the tank (3 screws only), disconnect the male pin (gray wire) corresponding with the pink wire from the clock and isolate it. Rebuild the bike and have fun.
I muss comfess I really love this bike. I owned several 50ies in my life and was supposed not to have one anymore but I couldn*t resist buying this one, the sound and the look and the size makes you feel great riding it. But it's probably the heaviest 50 ever built.
Is it the pink thread that and surrounded in the photo that needs to be cut?
I dont have one in stock at the minute but as soon as i do i will get a picture some other people have done this on there bike maybe they have pics of this
Can we have a picture of the cable that needs to be cut
If thats the one from the clock then thats it
is this thread?
Nothing happens it will still be restricted